Request for S.A.P. calculation. Dwelling details.

back

You can make a request for a SAP calculation by describing the dwelling on this form and clicking the submit button. The cost of the calculation is £150.00 per dwellingfor SAP 2005 or £100.oo for SAP 2001. You will be invoiced for this amount and the calculation will be sent on receipt of payment.
The calculation can be done using SAPPER 5.10 or SAPPER 6.00 (SAP2001) BRE approved program.
You can go off-line to complete the details.

It may be necessary for more detailed information to be requested.

Name
Company
Address
Telephone number
E-mail Address
Project name
Project type

Select which SAP applies
SAP Worksheet 9.60 (before April 2002)
SAP Worksheet 9.70 (after April 2002)

If you send me Building Regulations drawing - plans sections and elevations, I can take off all areas of the building elements, otherwise, please give details as required:
DIMENSIONS

Ground floor area (sq.m.) Ground floor average height in m. ( floor - ceiling)
First floor area (sq.m.) First floor average height in m. ( ceiling - ceiling)
Second floor area (sq.m.) Second floor average height in m. ( ceiling - ceiling)
Living room area (sq.m.)

VENTILATION
Select which best describes the construction
Select which best describes the ground floor
Select which best describes the ventilation
Number of Chimneys
Number of flues
Number of fans or passive vents
Number of sides sheltered (default = 2)
percentage windows draught stripped
Result of a pressure test if applicable

WINDOWS DOORS AND ROOFLIGHTS
Describe windows (type 1)
Describe windows (type 2)
Describe door(s)
Describe rooflights
Overshading
Heavy overshading
More than average overshading
Average overshading
Little overshading

Schedule of windows, doors and rooflights
Orientation Area Type 1 Area Type 2
North
Northeast
East
Southeast
South
Southwest
West
Northwest
North facing rooflights area
Rooflights area (other than northerly)
Total doors area

FABRIC HEAT LOSSES
If you know the U-value of the element you do not need to give any further description. If you need a U-value calculation done for a floor if is best if you complete the request for a U-value calculation by clicking the link.
Walls Type 1 description
Walls Type 2 description
Roof Type 1 description
Roof Type 2 description
Ground floor description
Any other element
Walls Type 1 area (sq.m.) Walls Type 1 U-value
Walls Type 2 area (sq.m.) Walls Type 2 U-value
Roof Type 1 area (sq.m.) Roof Type 1 U-value
Roof Type 2 area (sq.m.) Roof Type 2 U-value
Ground floor area (sq.m.) Floor U-value
Other element area (sq.m.) Other U-value
Ground floor exposed perimeter (m)
N.B.If you have given full construction details you need not give U-values - I will work it out.

SPACE HEATING
Fuel for main heating system
Main heating system (e.g. boiler and rads)
Details of boiler (model if possible)
Details of heating control system
If boiler and rads, is the pump in a heated space?
Is the boiler interlocked with the cylinder stat and room stat?

WATER HEATING
Fuel for water heating system
How is water heated (e.g.by the main boiler)
Details of any hot water storage
Cylinder insulation and thickness
Details of any solar panel

SECONDARY HEATING
Fuel for secondary heating (if any)
Details of secondary heating system if any
How did you find this site?

top of page | back | home